Flow- Sreekon

For operation with a wide range of OPTIFLUX and WATERFLUX flow sensors
For flow sensors over a diameter range from DN2.5 up to DN1200
Housing in aluminium with a polyester topcoat or in stainless steel (option)
Tropicalized electronics to protect it from humidity (option)
Available outputs: 4...20 mA current output, pulse/frequency output, status output/limit switch and Ex i I/O (option)
Communication to third party systems via Foundation Fieldbus, Profibus PA/DP or Modb

High measuring accuracy and long-term stability : ±0.15% of measured value ± 1 mm/s
Optimal zero point stability independent from product properties.
Superior process reliability thanks to standard integrated diagnostics: testing of device. functions, check for compliance with specifications and application testing.
Available inputs and outputs: Current output (incl. HART®), pulse/frequency output, status. output, control input and current input.
Suitable for both partially filled and fully filled pipelines.

Rugged liners suitable for any water and wastewater application.
Proven and unsurpassed lifetime, huge installed base.
Tamper proof, fully welded construction, also available in customer specific constructions.
Drinking water approvals including KTW, KIWA, ACS, DVGW, NSF, WRAS.
Suitable for subsoil installation and constant flooding (IP68).
Bi-directional flow metering.
Compliant with requirements for custody transfer.

Unique rectangular sensor construction results in good low flow performance and a large turndown ratio.
Large measuring range. High accuracy at peak flows during the day and at low flows during the night
Compliant with requirements for custody transfer(MID MI-001, IS4064, EN 14154)
Standard inhouse wet calibration
Optional verification to MID Annex MI-001 for water meters (Module B and D)
No inlet or outlet sections required when installed e.g. behind an elbow or reducer

Flow